Travertine Tiles Replaced and Polished in Ascot

The owner of this home in Ascot had 75m2 of travertine tiles installed on the ground floor and around 10 tiles were damaged and needed replacement; this can be difficult as like most things tiles are created in batches and it can be tricky to find an exact match. Fortunately we managed to source a very close match and set about installing them.

Travertine Floor Laid

Cleaning Travertine Tiles and Grout

To get the match as close as possible we then set about giving the whole floor a general clean using Tile Doctor Pro-Clean which is a multi-purpose cleaner, it was equally important to concentrate on the grout of the existing floor which needed to be clean to match the new grout of the new floor. Cleaning the floor also ensures any grit is removed from the tile surface prior to the next step which was to polish the floor using a set of Burnishing pads, this is important as grit could get trapped in the burnishing pads and scratch the floor. We washed the floor down with clean water using a wet vacuum to remove the water from the floor before moving onto the next step.

Travertine Floor Before Burnishing

Polishing and Sealing Travertine Floor Tiles

We polished the floor using a set of 17” Burnishing pads fitted to our weighted polishing machine; the pads are diamond encrusted and you start with the coarser Red pad designed to remove sealers before moving on to the White, Yellow and finally Green polishing pad to achieve a high shine finish.

The last step was to seal the floor which we did using two coats of Tile Doctor Colour Grow which is colour intensifying sealer that enhancing the natural colours in the Travertine tile as well as providing on-going durable surface protection.

Travertine Floor Completed
We polished and sealed the entire floor to ensure a consistent look; the customer was certainly happy and left the following comment.

“Overall a good job well done. Thank you.
Mr. Wilkinson, Ascot”

 

Travertine Tiles Replaced and Polished in Ascot

Replacing Damaged Travertine floor tiles and Polish in Ascot

This job involved removing and replacing five damaged Travertine floor tiles which can be tricky if you have under floor heating. The travertine floor was laid in the kitchen of a house in the town of Ascot which is famous for horse racing.

Removing the Damaged Travertine floor tiles

As you can see from the photograph below we set about marking up the damaged tiles and then proceeded to cut along the lines with an angle grinder which was fitted with a dust free extraction system. Once the bulk of the travertine was removed we used a hammer and chisel to carefully chop out the remaining edges, grout and tile adhesive. This left large holes to take the replacement tiles which were still available and were secured in place with tile adhesive and matching grout, we left the floor at this point to allow the adhesive and grout to dry.

Damaged Travertine Tile

Cleaning and Polishing Travertine Tiles

The next step was to strip and polish the entire floor using a set of diamond encrusted Burnishing Pads fitted to a rotary machine. You start with a Red stripper pad with water to remove any sealers, moving onto the White, Yellow and finally Green pad which polishes the floor to a high shine. The last step was to seal the floor using two coats of Tile Doctor Colour Grow which brings out the colour in natural stone as well as providing durable stain protection.

The re-polishing and sealing really helped to let the new Travertine tiles blend into the floor, take a look at the finished result in the photograph below and see if you can spot the replaced tiles.

Travertine Tile Replaced and Polished
 

Broken Travertine Tile Replacement in Berkshire