Recently, Berkshire tile doctor was asked to restore a pitted and heavily soiled limestone floor in the village of Crookham by a previous customer. I always like it when that happens as there’s no better testimonial that than being asked by a previous customer to do more work. This floor ran throughout the kitchen, utility and downstairs toilet and had a range of soils on the floor, especially in the kitchen. The floor had also lost its sheen and although the customer did not want a deep shine they did want the floor to have some reflection to it.
Deep Cleaning the Limestone Tiled Floor
We used Tile Doctor Pro-Clean to get the floor clean again by applying a medium dilution which was spread liberally over the floor using a bucket and soft brush. The cleaning solution was allowed to dwell on the stone before being scrubbed into the tile and grout using a stiff brush and pad.
A coarse diamond burnishing pad was then used to remove some surface soils and any remaining sealer from the surface of the limestone before giving the floor a rinse using our unique clean and capture system. This system combines, water, heat, pressure and powerful vacuum extraction and is highly effective at blasting away soils from the pits in the limestone. Once we were happy the floor was clean we set about restoring the finish to the stone with the medium, fine and very fine burnishing pads.
The floor was given another rinse and the limestone left for 48 hours so it could thoroughly dry out before sealing.
Sealing the Limestone Floor
To seal the stone we applied a couple of coats of Tile Doctor Colour Grow which is a durable sealer that impregnates the stone and enhances the deep natural colours in the stone.