This job involved removing and replacing five damaged Travertine floor tiles which can be tricky if you have under floor heating. The travertine floor was laid in the kitchen of a house in the town of Ascot which is famous for horse racing.
Removing the Damaged Travertine floor tiles
As you can see from the photograph below we set about marking up the damaged tiles and then proceeded to cut along the lines with an angle grinder which was fitted with a dust free extraction system. Once the bulk of the travertine was removed we used a hammer and chisel to carefully chop out the remaining edges, grout and tile adhesive. This left large holes to take the replacement tiles which were still available and were secured in place with tile adhesive and matching grout, we left the floor at this point to allow the adhesive and grout to dry.
Cleaning and Polishing Travertine Tiles
The next step was to strip and polish the entire floor using a set of diamond encrusted Burnishing Pads fitted to a rotary machine. You start with a Red stripper pad with water to remove any sealers, moving onto the White, Yellow and finally Green pad which polishes the floor to a high shine. The last step was to seal the floor using two coats of Tile Doctor Colour Grow which brings out the colour in natural stone as well as providing durable stain protection.
The re-polishing and sealing really helped to let the new Travertine tiles blend into the floor, take a look at the finished result in the photograph below and see if you can spot the replaced tiles.
