Pangbourne is a large village situated on the River Thames, about 4 miles west of Reading. The village has a long, rich history – dating back to at least the 9th century. There are still quite a number of Victorian-style houses located in the village, including one that I visited recently to carry out a Victorian tiled floor restoration.
Cleaning a Dirty and Stained Victorian Tiled Floor
As I’ve mentioned, the top layer of this original Victorian tiled floor was marked with all manner of staining, so I decided that it would be suitable to use a set of 100 and 200 grit coarse Diamond pads fitted to a weighted machine and lubricated with a little water to grind away the damaged surface and restore the surface of the tiles.
I then cleaned the tiles using Tile Doctor Pro Clean, which is our reliable alkaline-based cleaner for natural stone. This product really helped to break down and release the soils. Next, I rinsed the floor with hot water under low pressure to remove any remaining debris, dirt and contamination.
With the cleaning process completed, the floor was allowed to dry for a full 48 hours. In older properties like these dampness can be an issue as damp-proof membranes are a relatively modern invention and I didn’t want to take any chances.
Sealing a Victorian Tiled Floor
Returning to the property two days later, I ran some moisture tests to ensure the stone was completely dry and could be sealed. It’s always important to run damp tests on any tiled floor before sealing, since a small amount of excess moisture can undermine the performance of the sealer, and thus expose the floor to ingrained dirt and stains.
Thankfully, the floor proved dry and I could seal it using Tile Doctor Seal and Go which, as a topical sealer, offers a robust surface seal and an aesthetically pleasing low-sheen finish. It’s also water based so it doesn’t give off a smell as it dries.