Refurbished Victorian Quarry Tiles

Neglected Victorian Quarry Tiled Floor Restored in Pangbourne

We were asked to restore this Original Victorian Quarry tiled floor following a major refurbishment of a Grade 1 listed mansion in Pangbourne, Berkshire. The tiles has seen many years of neglect and as you can see from the photo below it was not given much thought or care by the builders and decorators who had been working on the property.

Neglected Victorian Quarry Tiles

Cleaning Victorian Quarry Tiles

We set about stripping and cleaning the floor of all the paint and dirt that had been left to accumulate on its surface over the years starting with a strong dilution of Tile Doctor Pro-Clean worked into the Quarry tiles using a rotary machine fitted with a black scrubbing pad. This was removed using a wet and dry vacuum and followed by hours of detailed cleaning using Tile Doctor Remove and Go mixed 50/50 with NanoTech Ultra Clean which adds Nano sized abrasive particles to the solution to make a more effective coatings remover. We allowed this to dwell for a short while before agitating it with a rotary machine again fitted with a black scrubbing pad working the solution into the floor, this treatment tackled the stubborn paint and all sorts of other residues. Once we were happy with floor it was given a good rinse down with clean water and then left to dry.

Refurbished Victorian Quarry Tiles

Sealing Quarry Tiles

Once the Quarry Tiles were dry we set about sealing them, a low sheen finish was required so four coats of Tile Doctor Seal and Go were applied, it’s a water based sealer that will protect the surface going forward. The Main contractor could not believe we managed to get the floor looking pristine and back to its original condition.

Transforming a neglected Victorian Quarry Tiled floor in Berkshire

Neglected Victorian Quarry Tiled Floor Restored in Pangbourne Read More »