A customer near Maidenhead asked us to take a look at their dirty porcelain floor tile and grout which had degenerated following ten years of traffic from children and pets. Domestic cleaning products were proving ineffective and professional help was now required to get the floor looking healthy again.
Deep Cleaning Porcelain Tiles
To get the dirt out of the tiles they were cleaned with a very mild hot water dilution of Tile Doctor Pro-Clean which was spread over the tiles and left to soak into the tiles for twenty minutes, during this time the solution was scrubbed into the grout lines using a stiff brush.
The next step was to connect up our van mounted high pressure hot water clean and capture system (see photo below) and rinse the tiles and grout. This system produces very little water or spray because of its unique recovery system to a waste tank in our van. It also neutralises cleaning solutions and the high pressure penetrates into the pores of the tile removing all the soiling and pollutants.
Applying Grout Colourant
The powerful pressure cleaning worked well on the tiles but unfortunately the grout lines had absorbed too much soiling and staining over the years which had become ingrained to a depth which could not be removed without replacing the grout. Fortunately there was another option which was to apply a Grout Colourant. Tile Doctor has a range of epoxy based colourant’s available in different colours which are relatively easy to apply and form a barrier over the existing grout to provide a uniform look and durable protection against future staining and discolouration
Hi Tim, Many thanks for the amazing results you achieved with my Kitchen/Conservatory floor, I was blown away by the finish – it looks like new! Thank you for care instructions, we will make every effort to follow carefully.
Best wishes and thank you again. Ms. J Walker